There are not many varieties of front shade, and there are two kinds of aluminum foil and non-woven fabric. Aluminum foil is generally divided into ordinary "light board" type and pattern type, the size is generally 60 * 130cm, suitable for most small cars. The aluminum foil insulation shade with suction cup is convenient to use. After being unfolded, it can be sucked into the front windshield glass or the rear window glass with a suction cup.
In less hot seasons, color patterns can be placed outwards, and if the weather is very hot, aluminum foil can be turned outwards to ensure reflection of sunlight. In the purchase before the shade, it is best to choose with a suction cup, the texture of the material to be a bit harder. The "light board"-type or too-expensive front shading gear itself is not quite strong enough to fall off, so do not try to be cheap. It is generally better to use a brand of front shade to protect the packaging material. There is also a place where the suction cup is placed. The suction cup is not easily damaged. Bad suckers in the worst brands have been crushed. The remedy is to put them in boiling water for a while.
If the front glass of the car is wider, the general front sunshade can not be blocked, and you can choose two pairs of sunshades, like those of jeep type. Some vehicles have no shade area at the top of the front window glass and may have a windshield sticker. Both can beautify the vehicle, but also can play a part of the shade function.
Rear sun shade
After the sunshade is generally prepared for the guests, some of the high-end vehicles rear gear is the original configuration, is retractable, generally black mesh, this sunshade effect is good and beautiful and convenient, is the best After the sun block. For the original car without rear sunshade, only one of them is allocated. There are fewer monochromes on the market, and most of them are cartoons. When buying such products, pay attention to the size of the product and other relevant information in order to purchase according to the actual conditions of your own vehicle. If the rear window of the vehicle is relatively small, it is better to choose the suction cup to be arranged in a triangle. This fixed position is relatively small, and other positions such as a four-point fixed suction cup occupy a large position. There is also a cheaper price but no suction cup.
When buying this kind of product, we must first understand the size of the rear window of the car to see if it is appropriate. Otherwise, although we bought a bargain, if it is inappropriate or not to be obedient, we may have trouble repenting, return or replacement It is a costly and annoying thing.
When driving in summer, the sunshine coming from the side windows is still very strong. Paste the general film effect is not very good, still tan skin hot. Below to compare several side shade.
1, ordinary gauze side shade. This type of sunshade generally has two suction cups, or a suction cup in the middle. Its advantage is that it is more convenient to take down, but the problem is that when the window is to be shaken off, the suction cup may be knocked off, especially only two The kind of side shade on the sucker is easy to fall off.
2, electrostatic stickers side shade. Electrostatic sticking side sunshade is better than gauze type sunshade. The unique mesh hollow translucent design will not make people feel bored and closed. When sticking, it is best to stick the bottom edge of the window to about 5cm in the window slit so that there will be no situation where the static electricity is curled up when the glass is shaken. When not in use, pull the electrostatic sticker straight down, rinse it with clean water, and roll it up with smooth paper. You can reuse it later. When buying an electrostatic sticker, it is important to ask whether the material is soft or hard.
Some manufacturers use relatively poor materials, the products are relatively hard to make, like cardboard, the new product is opened when the electrostatic cracking sound is small, this electrostatic stickers use a long time, the adsorption force will quickly disappear, which fell. Others need to pay attention to, according to the size of their own windows to buy the right size electrostatic stickers, too small will reduce the shading effect, too much will block the rearview mirror line of sight, when buying should pay attention to see the product description .